A multifunction printer (MFP), the Canon Pixma MX490 has the ability to print, copy, and scan. especially when used with the installation CD, the Canon MX490 Setup. This manual walks the user through the installation procedure step by step. A multifunction printer that also functions as a scanner, copier, and fax machine is the Canon Pixma MX490. The instructions for configuring this device are provided in this article. It also explains how to install the ink cartridges and link the printer to your router and PC.

The Pixma MX490 all-in-one printer's characteristics, advantages, and how to use are covered in this page. With wireless capabilities, high definition printing, and a huge paper capacity of 250 sheets, the Pixma MX490 provides the finest in home printing. We'll walk you through the setup process, how to connect your new printer to your home network, and some fundamental troubleshooting techniques.

Wireless Canon Pixma MX490 Setup

The Canon Pixma MX490 printer setup is a quick and easy process that only takes a few minutes. You may start printing after completing these Canon Pixma Mx490 Installation Download. You'll need the following to set up your Canon Pixma Mx490 printer:

  • a laptop or PC with an accessible USB port.
  • an online presence (you can use a wired Ethernet cable if you prefer).
  • a wireless network that you (if it hasn't been) set up.

Connecting your printer to your computer directly using a USB cable

You'll need a USB cord to connect your printer straight to your computer. Buy one right now if you don't already have one. The following action is to activate both devices:

  • Install the printer's setup programme (in most cases, this will be located in the Start menu).
  • Connect one end of the USB cord to the device, and then connect the other end to a computer port that is available (usually somewhere near where other cables are plugged in).
  • Immediately after turning both devices on with power switches similar to these, turn them both on by pressing "Start" or any other button that causes an action to occur when pressed:

How to connect a wireless network you set up with the printer

Your wireless network must first be configured. You can move directly to step 3 if you have previously completed this. The printer should now be connected to the wireless network you just created by:

  • turning both cords and the electricity on (the power cable is longer than the USB cable)
  • Place each cable's end into the corresponding port on the back of each printer.
  • Make a wireless connection.
  • Using a USB cable, join.
  • Utilize the printer's USB connector to attach straight to a computer.

 

References: Canon Pixma Mx490 Driver Free Download