I will talk to you about the infrastructure of Plastic Switch Mould

Plastic Switch Mould consists of three parts: the input unit and the output unit, and the system software unit.

(1) Input unit (including input power switch, scenario power switch, LCD display touch display, sensor technology, etc.): change the external signal to the data transmission signal, spread on the bus structure;

(2) Output unit (including intelligent automotive relay and intelligent lighting module): receive relevant instructions, and make a relative output posture on the light effect according to the instruction;

(3) System software units (including system software switching power supply, system software digital clock, communication network cable): present the weak electricity installation switch power supply and manipulation signal carrier communication to the system software to maintain the normal work of the system software.

Plastic Switch Mould writes a variety of different lighting lamp programs based on the host or PC monitoring program. If you need to standardize management, you can set a server in the main control room. Each input and output unit set the unique address and set its role with mobile software. The input unit is generally working voltage. The input signal is transmitted on the network communication. All the output unit accepts and makes a distinguishing circuit. Each unit in the system software is provided with a microcontroller (CPU) and data information storage. All the main parameters are decentralized and stored in each unit. All the normal applications of other units, all system software is combined according to the system bus.

plastic switch mould https://www.tangrammould.com/Wall-Gang-Switch-Mould.html