What to Do If You are Internet not working on Wi-Fi.

When you have Wi-Fi but no internet, try these troubleshooting steps.

1. Restart both your router and modem. Restarting is the initial step in troubleshooting most tech difficulties, particularly networking hardware issues. Rebooting the router and modem clears the memory and fixes any residual issues.

2. Check that you're connected to the right network. Check that your Wi-Fi device isn't attempting to connect to a neighboring network or a Wi-Fi repeater that isn't fully configured, since either of these could be experiencing issues that prevent you from connecting. In some cases, even if your Wi-Fi is turned on and connected, you may not have access to the internet.

Open the Wi-Fi settings and look at the network name you're attempting to connect to. If you do not recognize it, it is most likely not your network.

Wi-Fi extenders, on the other hand, may utilize the same network name as your router. If you suspect this is happening, reset the Wi-Fi extender or temporarily unplug it to check if you can obtain Wi-Fi without it. If you can connect to the internet, the issue is with the extender, which you can address from there.

3. Enter the Wi-Fi password again. If you enter the wrong Wi-Fi password, certain operating systems will not notify you. Although your laptop, tablet, or phone may show that you have a strong Wi-Fi connection, the router will refuse to communicate with your device if the password is incorrect.

If you're using a public Wi-Fi hotspot, you might be using an old password that used to work but has since changed, which is common when connecting to a network that you haven't used in a long time.

4. Unplug from your VPN. Similarly, if your device is connected to a VPN service, you may perceive a complete Wi-Fi connection even if you have restricted or no internet connections. To see if the problem is resolved, try a new VPN server or disconnect from the VPN.

5. Check that you have an IP address. You can be connected to a router with full bars and still not have internet access if the problem is with your router's connection to your Internet Service Provider (ISP).

When this occurs, your router continues to function on your network, but because it cannot connect to the internet, it lacks a legitimate public IP address, preventing you from sending or receiving data over the internet.

Another reason you may not have a proper IP address is if your device is configured to utilize a static IP address but the router does not allow that IP address on the network, which can happen if you mix a static IP address with a dynamic IP address.

The simplest solution is to leave DHCP enabled on the router and remove the device's static address. In Windows, for example, you may do this in Control Panel by going into the network adapter's properties and selecting Obtain an IP address automatically rather than the manual assignment option.

6. Launch your browser. If you're utilizing a Wi-Fi hotspot, such as at a hotel or airport, you might expect to be able to check your email or browse the internet as soon as you have a strong wireless signal, but that's usually not the case.

When you open your web browser, a hotspot page with basic information about the firm that provides the hotspot and what to do next appears. Accept the agreements or enter the password provided by the company.​

7. Change the DNS server. Even the strongest Wi-Fi signal will not provide you with internet access if your device is connected to a DNS server that has damaged data or is offline.

To see if the web pages finally load, find an alternative DNS server and update the DNS server settings on your device.

8. Examine the MAC address filtering. Another reason you can be connected to Wi-Fi but not have internet access is if your router is configured with MAC address filtering. This prevents devices from connecting to the router unless they have a unique MAC address.

So, while your device may appear that Wi-Fi is connected, any effort to connect to the internet or another network device is prevented.

Because this configuration is typically found solely on business networks, your best hope for getting around the MAC address filtering is to request that your MAC address be added to the permitted list.

Conclusion: -

In this article, we will tell you about How to fix Internet not working on Wi-Fi. Because of what reasons it stops working. If still, you face any problem related to this. So you can call us at this number +1-888-535-8623.